Independent contractors, licensed in CT

Chimney Inspection in Cheshire, CT

An inspection is the only way to know what the inside of a flue looks like, and in a state where four homes in ten have burned oil for decades, the inside is where the damage is.

Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about a chimney inspection in Cheshire

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Inspection in Cheshire, Connecticut

What to ask for on Chimney Inspection in Cheshire

  • Level 1, 2 and 3 to the NFPA 211 standard
  • Camera survey of the full flue
  • Required on a sale and on any fuel change
  • Written report with photographs
Call about a chimney inspection
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Cheshire. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown rebuilt with a drip edge in Cheshire, CT
Crown rebuilt with a drip edge Cast and sloped away from the flue with an expansion joint at the tile, so water drips clear of the brick instead of running down it.
Joints raked back and repointed in Cheshire, CT
Joints raked back and repointed Mortar matched to the masonry, because mortar harder than the brick makes the brick the sacrificial part.
Stainless liner sized to the appliance in Cheshire, CT
Stainless liner sized to the appliance Diameter taken from the manufacturer venting tables, insulated where the chimney runs cold.

Chimney Inspection in Cheshire

The systems we see in Cheshire tend to share a history — a heating system replaced once or twice, cooling added later, and ductwork extended as rooms were added rather than designed for the house as it now stands. Most comfort complaints here start there.

67% of homes in Cheshire still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

What forty years of oil does inside a flue

Oil-fired heating produces a sooty, acidic residue. It accumulates in the flue, and unlike wood creosote it does not announce itself with smell or smoke. What it does instead is attack the mortar joints between flue tiles and the tiles themselves, slowly, from the inside, in a part of the chimney nobody ever sees.

This is why a visual inspection from the roof is close to useless on an older Connecticut chimney. The crown might be perfect, the brick sound, the cap correctly fitted, and the flue liner failing along its whole length. A camera answers it in twenty minutes and nothing else does.

What the camera actually looks for

Cracked or missing flue tiles, mortar joints that have washed out between them, gaps where the liner has separated, and any sign that combustion products have been reaching the masonry behind. A gap in the liner matters because it lets flue gases into the chimney structure and, in the worst case, into the house.

Why this matters before a conversion

If you are switching from oil to gas, the state of the existing flue decides part of the job. A liner is going in either way because the flue will be oversized for the new appliance, but whether the surrounding masonry also needs work is something you want established before the quote, not after the boiler is out.

What a good report contains

You should receive something written, with photographs and camera stills, that states what was examined, what was found, and what it means. A verbal summary at the door is not a report, and it is not something you can show a buyer, a seller or an insurer.

Findings separated from recommendations

A good report distinguishes what is a safety defect from what is wear worth watching. Those are different categories and conflating them is how an inspection turns into a sales document. If everything found is urgent, ask why.

Photographs you can understand

Camera stills of the flue, exterior shots of the crown, cap and flashing, and a photograph of the appliance connection. You should be able to look at the report a year later and know what state the chimney was in.

The full guide: everything about chimney inspection — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Cheshire.

Chimney Inspection in Cheshire — FAQs

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Do we need a chimney liner?

If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.

What does a Level 2 inspection include?

Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.

Is chimney waterproofing worth doing?

On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.

What qualifications should a Cheshire chimney company have?

Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.

Can you work on a rental or multi-family property in Cheshire?

Yes. Ask for the findings in writing so a landlord or managing agent can act on them. In multi-family buildings the usual complication is the stack itself — one chimney frequently carries flues for several units with different owners, so establishing whose flue is whose comes before anyone quotes work.

The chimney is not used at all. Do we still need this?

Yes, and disused flues are where the worst findings are. An uncapped, unused flue collects rain, leaves and nesting for years with nobody noticing, and if any appliance still vents into that chimney the condition of the whole structure matters.

How often should a chimney be inspected?

Annually, whatever it vents. NFPA 211 sets that standard and it covers oil and gas appliances as well as wood. In Connecticut, where oil is so common, the annual flue check is arguably more useful than the annual sweep.

Call now How it works