Independent contractors, licensed in CT

Covering 4 ZIP codes

Chimney Flashing Repair in East Hartford, CT

Flashing is the metal that seals the joint where the chimney comes through the roof. When water shows up on a ceiling near the chimney and only in driving rain, this is almost always why.

  • Covering 4 East Hartford ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about flashing repair in East Hartford

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Flashing Repair in East Hartford, Connecticut

What to ask for on Chimney Flashing Repair in East Hartford

  • Step and counter-flashing in copper or aluminum
  • Reglet cut into the mortar joint
  • Slate and cedar detailing
  • Coastal wind-driven rain assessment
Call about flashing repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in East Hartford. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown rebuilt with a drip edge in East Hartford, CT
Crown rebuilt with a drip edge Cast and sloped away from the flue with an expansion joint at the tile, so water drips clear of the brick instead of running down it.
Joints raked back and repointed in East Hartford, CT
Joints raked back and repointed Mortar matched to the masonry, because mortar harder than the brick makes the brick the sacrificial part.
Stainless liner sized to the appliance in East Hartford, CT
Stainless liner sized to the appliance Diameter taken from the manufacturer venting tables, insulated where the chimney runs cold.

Chimney Flashing Repair in East Hartford

Equipment in East Hartford has to cover a wider range than most of the country asks for — hard winter cold at one end and humid stretches in the eighties and nineties at the other. A system sized for the middle of that range disappoints at both ends of it.

About 69% of homes in East Hartford predate 1970, so the original heating system has usually been replaced at least once and cooling added afterward; 23% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

Why the shoreline sees more of this

Wind-driven rain behaves differently from rain falling vertically. It gets under laps, drives up the face of a flashing, and finds gaps that hold perfectly well in ordinary weather. Along the Sound and the southeastern shoreline that is most of the serious rain, which is why flashing failures cluster on the coast.

If it leaks only in storms

That is the signature. A cracked crown leaks in any rain; a flashing gap leaks when the wind drives water at it. Telling the two apart before anyone starts work saves repairing the wrong thing.

Coordinating with a reroof

The best moment to redo chimney flashing is when the roof is off, and the worst outcome is a roofer bedding tiles or shingles over the old flashing to save time. If a reroof is coming, raise the chimney detail before the work starts.

What proper flashing is, and what it is not

Correct flashing is two separate layers. Step flashing is a series of L-shaped pieces woven in with the roof courses as they go up the side of the chimney. Counter-flashing is a second layer let into a groove cut in the mortar joint, folded down over the step flashing so water running down the masonry is thrown clear.

What is very often there instead is roof cement or sealant troweled across the joint. It looks like a repair for a season or two, then it shrinks, cracks and lets water straight in. Any quote that describes the fix as sealing or caulking the joint is describing a patch.

The reglet is the detail that lasts

Counter-flashing has to be cut into the mortar, not stuck to the surface. Surface-mounted metal held with sealant fails when the sealant does, which is a matter of a few years. A reglet cut and the metal wedged and pointed in lasts as long as the roof.

Roof material changes the job

On asphalt shingle this is routine. On slate it is skilled work, because slates have to be lifted and relaid rather than nailed through, and a broken slate becomes the next leak. On cedar shingle the detail again differs. Ask what experience they have with your roof, not just with chimneys.

The full guide: everything about chimney flashing repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in East Hartford.

Areas we cover in East Hartford

Our East Hartford coverage takes in the neighborhoods around Burnham, Burnside, Charter Oak Landing and Coachlight Village.

Chimney Flashing Repair in East Hartford — FAQs

How much does chimney work cost in East Hartford?

It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.

Do you cover all of East Hartford?

Yes — all 4 ZIP codes in East Hartford and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.

How quickly can someone get to me in East Hartford?

For a routine inspection or sweep, usually within a few days, and sooner outside the fall rush. Late spring through early fall is the quiet season and the easiest time to book. If you have had a chimney fire, or you can smell gas or have a carbon monoxide alarm sounding, that is not a scheduling question — leave the building and call emergency services from outside.

My fireplace smokes into the room. What is wrong?

Several possible causes, and they need different work. A blocked cap or arrestor, a damper not opening fully, a smoke chamber that was never parged, a flue too small for the fireplace opening, or a chimney too short relative to the roof around it. A house sealed tight enough to run under negative pressure will also pull air down the flue. An inspection separates them; guessing does not.

Should the chimney be repaired or rebuilt?

It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.

Do you charge for a quote in East Hartford?

We charge nothing at any point — contractors pay us, you never do. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

How long should flashing last?

Copper will outlast the roof. Aluminum gives decades. Sealant gives two or three years, which is why the distinction matters.

Does the roofer or the chimney company do this?

Either, provided they detail it properly. The important question is whether they cut a reglet and let the counter-flashing into the mortar, or whether they intend to surface-mount and seal.

Neighborhoods we cover in East Hartford

Chimney work across East Hartford and the areas around it.

  • Burnham
  • Burnside
  • Charter Oak Landing
  • Coachlight Village
  • Connecticut Fire Museum
  • Connecticut River Trail
  • Downtown
  • Forbes Street Area
  • Goodwin University Area
  • Great River Park
  • Hockanum River Trail
  • Hops on the Hill
  • Mayberry Village
  • Rentschler Field
  • Silver Lane Area
Call now How it works