Independent contractors, licensed in CT

Covering 2 ZIP codes

Chimney Crown Repair in Stratford, CT

The crown is the slab at the very top that throws rain clear of the flue. On most older Connecticut chimneys it is a thin mortar wash that cracked years ago, and it is where the water is getting in.

  • Covering 2 Stratford ZIP codes
  • Free to use, no obligation
Carbon monoxide alarm, a smell of gas, or smoke coming into the room?

Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.

Call about crown repair in Stratford

(844) 785-4066

Free to use, and there is nothing to pay us. You are never committed to going ahead.

What happens when you call

  1. You describe the problem and where you are.
  2. We put you in touch with a licensed contractor covering that area.
  3. They arrange the visit and agree the price with you directly.

Worth having to hand

  • Roughly how old the system is
  • What it is doing — or not doing
  • Your ZIP code
Chimney Crown Repair in Stratford, Connecticut

What to ask for on Chimney Crown Repair in Stratford

  • Crack repair and flexible coating
  • Full recasting with a drip edge
  • Expansion joint at the flue tile
  • Usually paired with a cap
Call about crown repair
  • Licensed & insured We match you with contractors who hold current licensing and cover.
  • Know what to ask Every page says what decides the price, so you can judge a quote.
  • Free to use We never charge you. Compare quotes and walk away at any point.
  • Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.

How it works

Three steps, no obligation at any of them.

  1. 1

    Call and tell us what is wrong

    Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.

  2. 2

    A local contractor gets in touch

    A local chimney company contacts you to discuss the problem and arrange a visit in Stratford. What they charge to attend or diagnose is theirs to set, so agree it with them up front.

  3. 3

    You decide

    Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.

What these repairs look like

Illustrative examples of the work described here. More in our disclaimer.

Crown rebuilt with a drip edge in Stratford, CT
Crown rebuilt with a drip edge Cast and sloped away from the flue with an expansion joint at the tile, so water drips clear of the brick instead of running down it.
Joints raked back and repointed in Stratford, CT
Joints raked back and repointed Mortar matched to the masonry, because mortar harder than the brick makes the brick the sacrificial part.
Stainless liner sized to the appliance in Stratford, CT
Stainless liner sized to the appliance Diameter taken from the manufacturer venting tables, insulated where the chimney runs cold.

Chimney Crown Repair in Stratford

The systems we see in Stratford tend to share a history — a heating system replaced once or twice, cooling added later, and ductwork extended as rooms were added rather than designed for the house as it now stands. Most comfort complaints here start there.

About 21% of homes in Stratford were built before 1940 — old enough to have been built with radiators and no ductwork at all; 25% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)

Why the wash cracks and a proper crown does not

What most houses have is a mortar wash: mortar troweled over the top of the brick, sloped roughly, finishing flush with the outside edge. It has no reinforcement, no expansion joint around the flue tile, and no overhang. Mortar and clay flue tile expand at different rates, so the wash cracks around the tile within a decade, and with no overhang the water that gets through runs straight down the face of the brick.

A crown built properly is a cast slab, two inches or more thick at its thinnest, reinforced, sloped away from the flue, with a bond break or expansion joint where it meets the tile, and projecting past the brick with a drip edge cut underneath so water falls clear.

When a coating is enough

Hairline cracking in a crown that is otherwise sound and correctly shaped can be sealed with a flexible crown coating, which bridges movement in a way mortar cannot. It buys years, it is inexpensive, and it is a reasonable answer on a crown that is structurally fine.

When it has to be recast

Cracks you can get a coin into, missing sections, a wash with no overhang at all, or a crown that has broken up around the flue tile. Coating over that seals water in rather than out.

The crown is rarely the only thing

A cracked crown has usually been admitting water for years before anyone notices, and by then the water has been somewhere. Recasting the crown without checking the top few courses of brick underneath is how a chimney gets repaired twice.

Cap at the same time

The crown and the cap are both top-of-chimney work and the access is the same. Fitting a cap while the crown is being done costs far less than a second visit, and an uncapped flue undermines the crown work anyway.

Check the top courses

Where the crown has failed, the brick immediately below it has usually taken water for as long. Those courses often need rebuilding as part of the same job, and a quote that does not mention them is worth questioning.

The full guide: everything about chimney crown repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in Stratford.

Areas we cover in Stratford

Our Stratford coverage takes in the neighborhoods around Birdseye, Hawley Lane Area, Lordship and Nichols.

Chimney Crown Repair in Stratford — FAQs

My fireplace smokes into the room. What is wrong?

Several possible causes, and they need different work. A blocked cap or arrestor, a damper not opening fully, a smoke chamber that was never parged, a flue too small for the fireplace opening, or a chimney too short relative to the roof around it. A house sealed tight enough to run under negative pressure will also pull air down the flue. An inspection separates them; guessing does not.

Should the chimney be repaired or rebuilt?

It depends how far the damage goes. If a key scrapes mortar out but the brick is intact, that is repointing. Once brick faces have flaked through, a brick can be rocked by hand, or the stack leans, repointing has nothing sound to bond to and a rebuild is the honest answer. Most rebuilds stop at the roofline, because that is the section taking weather from every side.

Do you charge for a quote in Stratford?

We charge nothing at any point — contractors pay us, you never do. What a company charges to attend or to carry out an inspection is theirs to set, so agree it with them before they come out. An inspection is a real piece of work with a written report attached, and it is reasonable for it to be chargeable.

How often should a chimney be inspected?

Annually, whatever it vents — that is the NFPA 211 standard and it covers gas and oil appliances as well as wood. Sweeping frequency is separate and depends on what and how much you burn. An appliance used twice a year still needs the annual look, and those are the ones where neglected faults turn up.

Do we need a chimney liner?

If a camera survey finds cracked tile, washed-out joints or a separated liner, yes. You also need one whenever the flue is the wrong size for the appliance now venting into it, which is the common case after any change of fuel or appliance. A liner is sized from the appliance manufacturer venting tables, not from what happens to fit down the chimney.

What does a Level 2 inspection include?

Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.

Can I just seal it myself?

A flexible crown coating on a sound crown is within reach of a careful homeowner who is safe on a roof. Cast repairs and anything structural are not, and the risk of working at that height is the main argument against.

How long does a properly cast crown last?

Decades, where it is correctly shaped with an overhang and an expansion joint. The failures that come back early are almost always the ones with no overhang, or cast too thin.

Call now How it works