Chimney Services in New London, Connecticut

Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.

On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.

Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.

Yes. Ask for the findings in writing so a landlord or managing agent can act on them. In multi-family buildings the usual complication is the stack itself — one chimney frequently carries flues for several units with different owners, so establishing whose flue is whose comes before anyone quotes work.

About 48% of housing in New London predates 1940, and chimneys of that age behave differently. Many were built before flue tile was standard, so the flue is brick and mortar joints with no lining at all. Most have also changed fuel at least once without being resized. And the masonry itself is softer than anything made now, which means modern hard mortar does more harm than good on it. A camera survey is the only way to know which of those apply.

Around 25% of homes here heat with oil, and oil soot is acidic. It attacks flue tile and the mortar between tiles from the inside, where a look from the roof will not find it. That is the case for a camera survey rather than a visual inspection. It also matters if you ever convert to gas: the flue will then be far too large for the new appliance and will need relining.

Less urgently, but yes. An uncapped disused flue collects rain, leaves and nesting for years with nobody noticing, and water sitting inside it damages the structure from within. If the chimney is genuinely finished with, removing it above the roofline and roofing over is a legitimate option. If anything at all still vents into it — a water heater in particular — then it matters as much as it ever did.

Soft handmade brick and lime mortar that modern hard mortar will damage. That pattern is regional rather than universal — new London, Norwich, Groton, Mystic and Old Saybrook. It is worth knowing before you book, because it tells you what someone should be looking hardest at here.

It depends entirely on what the chimney turns out to need, and the spread is wide. Sweeping, an inspection, a cap or a damper repair are the inexpensive end and are usually done in one visit. Relining, rebuilding above the roofline and full crown recasting are the expensive end. Nobody can quote it honestly over the phone, which is why the inspection comes first. The contractor you are introduced to sets their own prices and agrees them with you directly.

Yes — all 1 ZIP codes in New London and the surrounding towns. Tell us where you are and we put you in touch with a company that covers it.