Covering 1 ZIP code
Chimney Flashing Repair in New London, CT
Flashing is the metal that seals the joint where the chimney comes through the roof. When water shows up on a ceiling near the chimney and only in driving rain, this is almost always why.
- Covering 1 New London ZIP code
- Free to use, no obligation
Leave the building and call from outside — that is an emergency services call, not a service call. A blocked or failed flue is one of the ways carbon monoxide reaches a living space, and headaches that clear when you leave the house point the same way. If you have had a chimney fire — a roaring sound, dense smoke, or debris on the roof — do not light another fire until the flue has been inspected.
Call about flashing repair in New London
(844) 785-4066Free to use, and there is nothing to pay us. You are never committed to going ahead.
What happens when you call
- You describe the problem and where you are.
- We put you in touch with a licensed contractor covering that area.
- They arrange the visit and agree the price with you directly.
Worth having to hand
- Roughly how old the system is
- What it is doing — or not doing
- Your ZIP code
What to ask for on Chimney Flashing Repair in New London
- Step and counter-flashing in copper or aluminum
- Reglet cut into the mortar joint
- Slate and cedar detailing
- Coastal wind-driven rain assessment
- Licensed & insured We match you with contractors who hold current licensing and cover.
- Know what to ask Every page says what decides the price, so you can judge a quote.
- Free to use We never charge you. Compare quotes and walk away at any point.
- Same-day reply Inquiries answered the day they arrive, usually within a couple of hours.
How it works
Three steps, no obligation at any of them.
-
1
Call and tell us what is wrong
Describe the problem and give us your ZIP code. We match you with a chimney company covering your area — there is nothing to fill in and nothing to pay us.
-
2
A local contractor gets in touch
A local chimney company contacts you to discuss the problem and arrange a visit in New London. What they charge to attend or diagnose is theirs to set, so agree it with them up front.
-
3
You decide
Book the work, wait a season, or get a second quote. There is no obligation to go ahead with the contractor we introduce you to, and nothing to pay us either way.
What these repairs look like
Illustrative examples of the work described here. More in our disclaimer.
Chimney Flashing Repair in New London
The systems we see in New London tend to share a history — a heating system replaced once or twice, cooling added later, and ductwork extended as rooms were added rather than designed for the house as it now stands. Most comfort complaints here start there.
About 48% of homes in New London were built before 1940 — old enough to have been built with radiators and no ductwork at all; 25% of them still heat with oil, and oil condensate is acidic enough that those flues deteriorate from the inside where nobody looks. (US Census ACS 2022)
What proper flashing is, and what it is not
Correct flashing is two separate layers. Step flashing is a series of L-shaped pieces woven in with the roof courses as they go up the side of the chimney. Counter-flashing is a second layer let into a groove cut in the mortar joint, folded down over the step flashing so water running down the masonry is thrown clear.
What is very often there instead is roof cement or sealant troweled across the joint. It looks like a repair for a season or two, then it shrinks, cracks and lets water straight in. Any quote that describes the fix as sealing or caulking the joint is describing a patch.
The reglet is the detail that lasts
Counter-flashing has to be cut into the mortar, not stuck to the surface. Surface-mounted metal held with sealant fails when the sealant does, which is a matter of a few years. A reglet cut and the metal wedged and pointed in lasts as long as the roof.
Roof material changes the job
On asphalt shingle this is routine. On slate it is skilled work, because slates have to be lifted and relaid rather than nailed through, and a broken slate becomes the next leak. On cedar shingle the detail again differs. Ask what experience they have with your roof, not just with chimneys.
Why the shoreline sees more of this
Wind-driven rain behaves differently from rain falling vertically. It gets under laps, drives up the face of a flashing, and finds gaps that hold perfectly well in ordinary weather. Along the Sound and the southeastern shoreline that is most of the serious rain, which is why flashing failures cluster on the coast.
If it leaks only in storms
That is the signature. A cracked crown leaks in any rain; a flashing gap leaks when the wind drives water at it. Telling the two apart before anyone starts work saves repairing the wrong thing.
Coordinating with a reroof
The best moment to redo chimney flashing is when the roof is off, and the worst outcome is a roofer bedding tiles or shingles over the old flashing to save time. If a reroof is coming, raise the chimney detail before the work starts.
The full guide: everything about chimney flashing repair — how the job works, what decides the price, and the questions worth asking before you book — is on the service page. This page covers what is different about it in New London.
Areas we cover in New London
Our New London coverage takes in the neighborhoods around Alewife Cove, Colman, Downtown and Willetts.
Chimney Flashing Repair in New London — FAQs
What does a Level 2 inspection include?
Everything in a Level 1 visual check, plus a camera survey of the entire flue and an examination of accessible attic, crawl space and basement areas. It is required on a property transfer, on any change of fuel or appliance, and after a chimney fire. A general home inspection does not include it.
Is chimney waterproofing worth doing?
On sound, porous, exposed masonry it genuinely slows the water absorption that destroys brick. On masonry that has already started to flake it is worse than doing nothing, because it traps water behind the damaged face. And it has to be a breathable repellent rather than a film-forming sealant — the film is what causes the damage people then blame on waterproofing.
What qualifications should a New London chimney company have?
Ask for three things and check them: current liability insurance, CSIA certification from the Chimney Safety Institute of America, and whatever license or registration your state requires for the work in question. Ask to see the documents rather than taking the logo on the van as proof. For anything involving gas appliance venting, ask separately who is pulling the permit.
Can you work on a rental or multi-family property in New London?
Yes. Ask for the findings in writing so a landlord or managing agent can act on them. In multi-family buildings the usual complication is the stack itself — one chimney frequently carries flues for several units with different owners, so establishing whose flue is whose comes before anyone quotes work.
My New London house is pre-war — what does that change?
About 48% of housing in New London predates 1940, and chimneys of that age behave differently. Many were built before flue tile was standard, so the flue is brick and mortar joints with no lining at all. Most have also changed fuel at least once without being resized. And the masonry itself is softer than anything made now, which means modern hard mortar does more harm than good on it. A camera survey is the only way to know which of those apply.
I heat with oil in New London — what does that mean for the flue?
Around 25% of homes here heat with oil, and oil soot is acidic. It attacks flue tile and the mortar between tiles from the inside, where a look from the roof will not find it. That is the case for a camera survey rather than a visual inspection. It also matters if you ever convert to gas: the flue will then be far too large for the new appliance and will need relining.
How do I know it is the flashing and not the crown?
Timing. Flashing leaks appear with wind-driven rain and often stop in ordinary showers. Crown leaks appear whenever it rains. A hose test from the roof, working upward in sections, settles it.
Can flashing just be sealed?
As a temporary measure before proper work, yes. As the repair, no — sealant over a flashing joint is the single most common failed chimney repair, and it usually hides the actual gap.
Other chimney services in New London
- Chimney Inspection
- Chimney Sweeping
- Chimney Relining
- Chimney Masonry Repair
- Chimney Crown Repair
- Chimney Cap Installation
- Chimney Waterproofing
- Chimney Damper Repair
- Fireplace Repair
- Chase Cover Replacement
- Smoke Chamber Parging
- Oil-to-Gas Flue Conversion
- Coastal Chimney Protection